Pharma Package QP1

The Pharma software application package contains applications concerning the topic compliance with pharmaceutical-relevant guidelines as 21 CFR Part 11 and USP 39, Chapter 41. The Pharma package includes applications such as user management, digital signatures, audit trail, USP minimum weight.

QApps included in the Pharma Package (QP1):

User Management

The function extension user management enables user accounts and access management to be set up as per guidelines in Directive 21CFR Part 11. Virtually any number of user accounts can be configured and are assigned freely definable roles with specific access rights. A user account can be used either without a password, with a local password, or with a network password (single sign-on with LDAP). All settings, as well as login and log-out actions, are logged in the audit trail. User accounts, roles and access management are configured in the Settings menu. Rules for logging in, logging out and the local password assignment can be fully configured in line with Directive 21CFR Part 11.

Material No. QAPP100

Available languages: English, German, Chinese, French, Italian, Japanese, Korean, Russian, Spanish and Portuguese

Last update: 15/05/2019

Request a quote

Electronic Signature

The function extension electronic signature enables an electronic report or printout to be signed using electronic signatures. The electronic signature process complies with Directive 21CFR Part 11 and is conducted in the workflow by entering the user password immediately before creating a report. All signature actions and results are logged in the audit trail, as well as on the electronic report or printout. In order to use electronic signatures, separate user accounts and passwords are mandatory as per 21CFR Part 11. It is not possible to use accounts without a password. The electronic signatures can be activated/deactivated in the Settings menu under Device settings. This setting affects all tasks. 

The permitted user accounts and password must also be set up in User management.

Material No. QAPP101

Available languages: English, German, Chinese, French, Italian, Japanese, Korean, Russian, Spanish and Portuguese

Last update: 15/05/2019

Request a quote

Audit Trail

The function extension audit trail enables the activities on the device to be logged in an audit trail as per guidelines in Directive 21CFR Part 11. The audit trail charts all relevant results and modifications on the device, for example: 

  • Creation/modification/deletion of tasks, users or roles - Login, logout, electronic signature
  • Modifications to clock, apps, settings menu 
  • Leveling, calibration and adjustment
  • and much more.

The audit trail can be viewed in the Settings menu under Device information and can be filtered and sorted by several criteria. These functions are also available on the network via the website for the balance. It is possible to export as a PDF. The audit trail is a ring buffer with 150,000 entries and cannot be manipulated.

Material No. QAPP102

Available languages: English, German, Chinese, French, Italian, Japanese, Korean, Russian, Spanish and Portuguese

Last update: 15/05/2019

Request a quote

minUSP

The function extension minUSP monitors compliance of the permitted working range as per US Pharmacopeia (USP) Section 41 and alerts the user when weighing values fall below the working range. The minUSP function can be activated/deactivated in the Settings menu under Device Settings. The starting point of the working range must be entered as the parameter in line with US Pharmacopeia (USP) Section 41. To calculate the valid starting point, you can either use QApp USPAdvanced or contact Sartorius Service. The minUSP function is also able to mark measuring values outside the working range as invalid, thus preventing impermissible values from being transferred. 

The minUSP function can also be used to monitor working ranges in line with other regulations by calculating and entering the starting point accordingly.

Material No. QAPP103

Available languages: English, German, Chinese, French, Italian, Japanese, Korean, Russian, Spanish and Portuguese

Last update: 15/05/2019

Request a quote

USP Advanced

The application USP Advanced determines the value for the starting point of the allowed working range according to US pharmacopeia (USP) Chapter 41. The procedure starts with the repeatability test where 10 weighing values of the same weight are measured and between the measurements the balance is zeroed/tared automatically. The second test segment is the accuracy test which uses an OIML or ASTM weight or a calibrated weight to aquire one weighing value. The application USP Advanced calculates the standard deviation, minimum operating range (ORmin), maximum operating range (ORmax) and determines if the result of the repeatability and accuracy test meet the requirements of USP Chapter 41.

Material No. QAPP104

Available languages: English, German, Chinese, French, Italian, Japanese, Korean, Russian, Spanish and Portuguese

Last update: 15/05/2019

Request a quote

Measurement Uncertainty

This application is used to ensure that the measurement uncertainty is displayed dynamically so that it conforms to the data documented on the DKD calibration certificate. The measurement uncertainty can be displayed as an absolute value (U), a relative value (U*) or as process accuracy (PA) in relation to the maximum capacity of the balance.

  • Absolute uncertainty: Absolute value (e.g., 12.00 g)
  • Relative uncertainty: Relative value (e.g., 0.000045%)
  • Process accuracy: e.g., 0.00013%

Material No. QAPP105

Available languages: English, German, Chinese, French, Italian, Japanese, Korean, Russian, Spanish and Portuguese

Last update: Coming Soon

Request a quote

User Calibration

The application user calibration features a guided external calibration process with up to 5 different OIML or ASTM weights. The user is guided through the complete calibration process and gets a comprehensive report if the calibration is passed or failed. Additionally the application for each calibration weight offers a long time evaluation of results based on the user defined warning and action limit. If the warning limit is reached or exceeded the user gets a warning message, if the action limit is reached or exceeded weight values become invalid and the user calibration procedure must be repeated.

Material No. QAPP106

Available languages: English, German, Chinese, French, Italian, Japanese, Korean, Russian, Spanish and Portuguese

Last update: 15/05/2019

Request a quote

Cubis II Q-App 中心 — 请填写下表完成您的报价申请

我们如何为您提供帮助?*